Bonafide SS107 Mounting Plate
If you have a Bonafide SS107. You know that if you want to mount a PowerPole or a Torqeedo or any thing to the rear of the kayak. You will have to drill holes. With this mount you don't have to. Its all ready Drilled for the four bolt pattern that the PowerPole and Torqeedo uses. It uses the existing holes for the access panel. Then a bolt runs thru the hole in the rear of the kayak.
So now you don't have to drill any holes in your kayak to mount a motor or a PowerPole. This mount is lite and really strong.
All hardware comes with the mount for installing.
Minn Kota Endura Motor Controller
Our controller is made so its easy hook up when you install a Minn kota Endura trolling motor. It comes with all connectors for the motor, battery, and actuator if you have one. It has five speeds for forward and three speeds for reverse.
You will need a mount to hold your control box. We recommend the YakAttack Torqeedo Throttle Mount. It will have to be altered very little to fit our Controller box.
Motor Controller Only works for
Minn Kota Endura series motors : 30, 40, and 55 lb thrust motors.
Motor Controllers can have a lead time of 2 weeks depending on volume of orders.
Actuator Controller Box
This box is made for if you want a stand alone control box for a actuator. Like the OneObjective Actuated Torqeedo Mount. It comes with ever thing you need to hook up your actuator except battery connectors for a 12 volt source to power the actuator.
DUE TO ORDER VOLUME LEAD TIME'S COULD BE TWO WEEKS. IN MOST CASES IT ONLY TAKES A WEEK TO GET. Feel free to email us at firstname.lastname@example.org to check lead times.
OneObjective Actuated Torqeedo Mount with Actuator Controller Box.
This mount and the Torqeedo work great together! The cool part about having the Torqeedo on this actuated mount. Is you can put your motor deeper in the water to take off and trim it up as you go to pick up more speed. But also you can run it in a lot shallower water with out having to pull your motor all the way out the water. Another great feature with our mount is you can use a Power Pole. And still be able to fold the motor up if you need to. The motor will fold right pass the Power Pole.
There is two ways to buy this mount.
As a kit - Torqeedo Mount and the Actuator Switch
Or separately. We do it like this because just in case some one wanst to make their own switch box they can or they can run ours. If you order as a kit it will come wired ready to go. Plug and Play. You just will need a 12 volt source to power the actuator.
weight of mount - 8 lbs
Due to order volume some orders could take two weeks to get. But in most cases only a week. You can email us at email@example.com for lead time questions.
New!! New!! New!!
Tired of dead GoPro batteries or trying to organize your boat in the dark? Check out the POWERSTICK 53inch & and POWER LIGHT by YOLOtek. Both game changers for anyone with a boat! Click here to learn more