KAYAK KEEL PROTECTOR
The kayak Keel Protector is a great way to protect your investment. Its a thick rubber that molds perfect to the keel of the kayak. Watch the video to see how easy it is to install. Also follow the directions as they are shown in the video. Warning!!! if you use 303products on your kayak. This product may not stick.
DO NOT USE ALCOHOL TO CLEAN THE HULL!! Use Acetone.
Please Note: Not available for order outside of the United States.
Trolling Motor Mount - Actuated
WARNING!! Nothing gets you closer to the fish than your kayak so why not get to those fishing holes quickly with the OneObjective trolling motor mount. The features on this mount are like no other mount out there. A 12 inch actuator allows you to trim the motor to get top speed and to lift it up if there are obstacles you need to get over. This setup allows you to use a power pole in-line with your trolling motor and still be able to fold the motor up out of harms way. This lite weight but durable composite board will last a life time.After a long day on the water the last thing you want to do is spend a lot of time packing your kayak up to head home; pull two pins for a quick and easy disconnect and the trolling motor is off and ready to travel home.
Specs:
Total weight of bracket and Actuator 8lbs
Rated up to 55 lb thrust
Models the mount fits - Bonafide SS127, Hobie Outback, Native Titan Propel
***Due to high volume of orders. Some orders may take a week to be shipped***
Please Note: Not available for order outside of the United States.
Trolling Motor Mount - Non Actuated
We have a lot of people ask for a non actuated mount. Well we did it. Nothing gets you closer to the fish than your kayak so why not get to those fishing holes quickly with the OneObjective trolling motor mount. The features on this mount are like no other mount out there. The hinge system will let the motor lift up if there are obstacles you need to get over. This setup also allows you to use a power pole in-line with your trolling motor and still be able to fold the motor up out of harms way. This lite weight but durable composite board will last a life time.After a long day on the water the last thing you want to do is spend a lot of time packing your kayak up to head home; pull two pins for a quick and easy disconnect and the trolling motor is off and ready to travel home.
Rated up to 55 lb thrust
Weight - 6 lbs
Models the mount fits - Bonafide SS127, Hobie Outback, Native Titan Propel
***Due to high volume of orders. Some orders may take a week to be shipped***
Please Note: Not available for order outside of the United States.
Bonafide SS107 Trolling Motor Mount - Actuated
Nothing gets you closer to the fish than your kayak so why not get to those fishing holes quickly with the OneObjective trolling motor mount. The features on this mount are like no other mount out there. A 12 inch actuator allows you to trim the motor to get top speed and to lift it up if there are obstacles you need to get over. This setup allows you to use a power pole in-line with your trolling motor and still be able to fold the motor up out of harms way. This lite weight but durable composite board will last a life time.After a long day on the water the last thing you want to do is spend a lot of time packing your kayak up to head home; pull two pins for a quick and easy disconnect and the trolling motor is off and ready to travel home.
Specs:
Total weight of bracket and Actuator 9lbs
Rated up to 55 lb thrust
Models the mount fits - Bonafide SS107
***Due to high volume of orders. Some orders may take a week to be shipped***
Please Note: Not available for order outside of the United States.
Bonafide SS107 Motor Mount - Non Actuated
Nothing gets you closer to the fish than your kayak so why not get to those fishing holes quickly with the OneObjective trolling motor mount. The features on this mount are like no other mount out there. The hinge system will let the motor lift up if there are obstacles you need to get over. This setup also allows you to use a power pole in-line with your trolling motor and still be able to fold the motor up out of harms way. This lite weight but durable composite board will last a life time.After a long day on the water the last thing you want to do is spend a lot of time packing your kayak up to head home; pull two pins for a quick and easy disconnect and the trolling motor is off and ready to travel home.
Specs:
Total weight of bracket and Actuator 6lbs
Rated up to 55 lb thrust
Models the mount fits - Bonafide SS107
***Due to high volume of orders. Some orders may take a week to be shipped***
Please Note: Not available for order outside of the United States.
Bonafide SS107 Mounting Plate
If you have a Bonafide SS107. You know that if you want to mount a PowerPole or a Torqeedo or any thing to the rear of the kayak. You will have to drill holes. With this mount you don't have to. Its all ready Drilled for the four bolt pattern that the PowerPole and Torqeedo uses. It uses the existing holes for the access panel. Then a bolt runs thru the hole in the rear of the kayak.
So now you don't have to drill any holes in your kayak to mount a motor or a PowerPole. This mount is lite and really strong.
All hardware comes with the mount for installing.
OneObjective Actuated Torqeedo Mount.
There is two ways to buy this mount.
As a kit - Torqeedo Mount and the Actuator Switch
Or separately. We do it like this because just in case some one wanst to make their own switch box they can or they can run ours. If you order as a kit it will come wired ready to go. Plug and Play. You just will need a 12 volt source to power the actuator.
weight of mount - 8 lbs
ONLY FOR THE LONG SHAFT Torqeedo MOTORS
Due to order volume some orders could take two weeks to get. But in most cases only a week. You can email us at oneobjectivebf@gmail.com for lead time questions.
OneObjective Actuated Torqeedo Mount with Actuator Controller Box.
There is two ways to buy this mount.
As a kit - Torqeedo Mount and the Actuator Switch
Or separately. We do it like this because just in case some one wanst to make their own switch box they can or they can run ours. If you order as a kit it will come wired ready to go. Plug and Play. You just will need a 12 volt source to power the actuator.
weight of mount - 8 lbs
ONLY FOR THE LONG SHAFT Torqeedo MOTOR
Due to order volume some orders could take two weeks to get. But in most cases only a week. You can email us at oneobjectivebf@gmail.com for lead time questions.
Bonafide RS117 Motor Mount
The OneObjective RS Motor Mount is the perfect mount for someone that wants to be able to throw on a trolling motor really quick to fish their favorite spot. With out spending a lot of money. This mount is really light and very strong. Also all of our mounts are drill less. So you don't have to drill any holes in your boat to mount it. Also all hardware is include to mount it to your boat. This mount weights in at 3.5 lbs. So you aren't adding much weight to your boat. Plus you can have this mount installed in 5 minutes.
Bonafide RS117 Mounting Plate
The OneObjective RS Mounting Plate is for if you want to mount a PowerPole to your RS. Or you can mount our Actuated Mount also. Because of the four bolt pattern you can also mount a Torqeedo. This mount is really light and very strong. Also all of our mounts are drill less. So you don't have to drill any holes in your boat to mount it. Also all hardware is include to mount it to your boat. This mount weights in at 3 lbs. So you aren't adding much weight to your boat. Plus you can have this mount installed in 5 minutes.
OneObjective Trolling Motor Mount
Our NEW OneObjective Trolling Motor Mount is a easy way to put a trolling motor on your kayak. This mount will work with most kayaks that has the four bolt hole pattern for a Power Pole. All hardware comes with the mount to install. This mount is lite and built to last.
This is for PRE ORDERS. Orders will ship March 2nd 2020
Vibe Seaghost Trolling Motor Mount.
Our new Vibe Seaghost mount is a great way to get a trolling motor on your 110 and 130. We use the same holes that your handle used and the hole where your rudder was located. It can be installed in 10 minutes with the supplied hardware. Your handle is also relocated to more user friendly position. As of right now this is made for a stick steer system. But can be rigged for a peddle steer system.
Vibe Seaghost Mounting Plate
Vibe Seaghost Mounting Plate is great way to mount a Power Pole, Torqeedo, or any other product that use's the four bolt pattern. It saves you from having to drill more holes in your kayak. We use the same holes that your handle used and the hole where your rudder was located. It can be installed in 10 minutes with the supplied hardware. Your handle is also relocated to more user friendly position. This mount is lite but built to last.
Fits Vibe Seaghost 110 & 130